Mar. 17, 2020
As for the Metal Filter Element device, I believe that everyone knows it a
bit. When using the device, we all know that the device needs to be replaced
after using it for a period of time, but many people don't know how long the
specific stainless steel filter should be replaced Below. Metal Filter Element
Wholesale explains the stainless steel filter replacement conditions and
precautions for everyone:
SS Wire Mesh Pleated Filter Cartridge
How long does it take to change the stainless steel filter?
In response to this problem, we will introduce to you that generally the part that needs to be replaced inside this equipment is the filter element. For the replacement of the filter element, we have to mention the personal use of the user. Each user's use of the device is different, and for different customers, the replacement time is different. A pressure gauge is installed on the outlet pipe or the inlet of the device. We can use the data displayed on the front and rear pressure gauges as a reference. The pressure difference that the normal normal filter element can withstand is between 0.5 and 1㎏ / ㎝. If the pressure difference exceeds this value, then we recommend that you replace it in time to prevent the excessive pressure difference from breaking the filter element and affecting the use of the filter.
Precautions for using stainless steel core filter:
First, when installing, we must pay attention to the protection of equipment parts. Generally, during transportation, the equipment is not installed, and the parts are separated and packed for transportation. In this process, we must pay attention to packing the parts into a plastic core or a protective sleeve to avoid the impact of external pollution.
Second, in stainless steel filter equipment, the key part is the filter element, especially in the process of replacing the filter element, we must pay attention to the point, we must ensure that the new filter element is in a sealed state and clean and pollution-free, if the filter element carries Some magazines or dust contamination will affect the filtering effect after installation on the equipment.
Third, the nozzle in stainless steel filter equipment is used to release pressure. In the process of releasing pressure, if the nozzle accidentally rushes to the human body, the consequences can not be conceived. Therefore, we recommend that you pay attention to the orientation of the nozzle when using it. It should also be operated slowly when the pressure is released.
In addition, in the process of replacing the stainless steel filter element, we must take out the old element first. At this time, everyone should pay attention to clean the mounting edge of the element, otherwise the new element we install will be contaminated immediately.
Our company also has SS Wire Mesh Pleated Filter Cartridge on sale, welcome to consult.
